First Aid Rescue Cage WP-NC2R-FAID

WP NC2R FAID SThe WP-NC2R-FAID First Aid Rescue Cage has been designed in strict accordance with Australian Standard AS 1418.17 for rescue and evacuation on worksites where injured personnel need to be
safely evacuated.

Features:

  • Suitable for use with a standard rescue stretcher
  • Can transport up to 6 personnel
  • Full height, outward opening gate for easy stretcher access
  • Fully enclosed mesh cage for extra safety and protection in emergency situations
  • Seat fitted to accommodate non-stretcher personnel
  • Fitted with 8 (eight) safety harness anchor points and internal hand rails
  • Supplied with rated lifting chains
  • Fork pockets provided for transport purposes only
  • Work performed in this cage shall be limited to special tasks of short duration
  • Load test certificate, risk control measure documents, work cover registration and comprehensive instructions supplied
  • Zinc finish
ModelMaximum
Capacity
Working Load Limit
(kg)
Dimensions
(mm)
Unit Weight
(kg)
WP-NC2R-FAID 6 people 750 2400 x 1200 x 2253 500
WP-FA-QLD 6 people 750 2900 x 1300 x 2352 615

 Warning
It is a mandatory requirement of AS1418.17 that suspension sling sets are supplied as an integral component of a personnel crane cage. If you are using or are offered a cage without dedicated chains or slings, that cage does not comply with Australian Standards and Design Registration requirements and should not be considered for the use of hoisting personnel**

NOTE: Type WP-FA-QLD has been designed and registered to comply with the QLD Tower Crane Code of Practice 2017.

first aid rescue cage wp nc2r faid

 

We are Adelaide based and deliver Australia Wide

australia

Brisbane - Sydney - Canberra - Melbourne - Hobart - Adelaide - Perth - Darwin - Regional Areas

Active Lifting is Quality Assured to ISO 9001 International Standards

Active Lifting Equipment

FOR ALL YOUR CHAIN & LIFTING SOLUTIONS