First Aid Rescue Cage WP-NC2R-FAID


The WP-NC2R-FAID First Aid Rescue Cage has been designed in strict accordance with Australian Standard AS 1418.17 for rescue and evacuation on worksites where injured personnel need to be safely evacuated.

• Suitable for use with a standard rescue stretcher
• Can transport up to 6 personnel
• Full height, outward opening gate for easy stretcher access
• Fully enclosed mesh cage for extra safety and protection in emergency situations
• Seat fitted to accomodate non-stretcher personnel
• Fitted with 8 (eight) safety harness anchor points and internal hand rails
• Supplied with rated lifting chains
• Fork pockets provided for transport purposes only
• Work performed in this cage shall be limited to special tasks of short duration
• Load test certificate, risk control measure documents, WorkSafe registration and comprehensive instructions supplied
• Zinc finish

First Aid Rescue Cage WP-NC2R-FAID


WP-NC2R-FAID First Aid Rescue Cage
Maximum Capacity  6 people
Working Load Limit (WLL)  750kg
Dimensions 2400 x 1200 x 2352mm
Gate Opening 700mm wide
Unit Weight 500kg

 WarningIt is a mandatory requirement of AS1418.17 that suspension sling sets are supplied as an integral component of a personnel crane cage. If you are using or are offered a cage without dedicated chains or slings, that cage does not comply with Australian Standards and Design Registration requirements and should not be considered for the use of hoisting personnel**

NOTE: For Queensland, also see typeWP-FA-QLD.  WP-FA-QLD has been designed and registered to comply with the QLD Tower Crane Code of Practice 2017.

We are Adelaide based and deliver Australia Wide


Brisbane - Sydney - Canberra - Melbourne - Hobart - Adelaide - Perth - Darwin - Regional Areas

Active Lifting is Quality Assured to ISO 9001 International Standards

Active Lifting is Quality Assured to ISO 9001 International Standards