Crane Cage (4 person) WP-NC
The WP-NC Crane Cage has been designed in strict accordance with Australian Standard AS 1418.17 to elevate up to 4 personnel where it is not practicable to erect scaffolds or use a specially designed device.
FEATURES:
• Suitable for a maximum of 4 people
• Fitted with mesh sides to prevent objects falling off the platform
• Fitted with four (4) safety harness anchor points
• Supplied with lifting chains
• Fork pockets provided for transport purposes only
• Work performed in this cage shall be limited to special tasks of short duration
• Load test certificate, risk control measure documents, WorkSafe registration and comprehensive instructions supplied
• Zinc finish
| Maximum Capacity | 4 people |
| Working Load Limit (WLL) | 500kg |
| Dimensions | 1220 x 1100mm |
| Unit Weight | 270kg |
| Fork Pocket Size | 185 x 85mm |
| Fork Pocket Centres | 680mm |
It is a mandatory requirement of AS1418.17 that suspension sling sets are supplied as an integral component of a personnel crane cage. If you are using or are offered a cage without dedicated chains or slings, that cage does not comply with Australian Standards and Design Registration requirements and should not be considered for the use of hoisting personnel**
