Crane Cage (1 person) WP-C8
The WP-C8 Crane Cage has been designed in strict accordance with Australian Standard AS 1418.17 to elevate one person where it is not practicable to erect scaffolds or use a specially designed device.
FEATURES:
• Suitable for a maximum of one person
• Fitted with mesh roof
• Fitted with safety harness anchor point and hand rails
• Supplied with lifting chains
• Fork pockets provided for transport purposes only
• Work performed in this cage shall be limited to special tasks of short duration
• Load test certificate, risk control measure documents, WorkSafe registration and comprehensive instructions supplied
• Enamel paint finish
SPECIFICATIONS
| WP-C8 Crane Cage (1 person) | |
|---|---|
| Maximum Capacity | 1 person |
| Working Load Limit (WLL) | 250kg |
| Dimensions | 750 x 750mm |
| Unit Weight | 150kg |
| Fork Pocket Size | 185 x 85mm |
| Fork Pocket Centres | 530mm |
It is a mandatory requirement of AS1418.17 that suspension sling sets are supplied as an integral component of a personnel crane cage. If you are using or are offered a cage without dedicated chains or slings, that cage does not comply with Australian Standards and Design Registration requirements and should not be considered for the use of hoisting personnel**
