Crane Cage (1 person) WP-C4

:

The WP-C4 Crane Cage has been designed in strict accordance with Australian Standard AS 1418.17 to elevate one person where it is not practicable to erect scaffolds or use a specially designed device.

FEATURES:
• Suitable for a maximum of one person 
• Fitted with safety harness anchor point and hand rails
• Supplied with lifting chains
• Fork pockets provided for transport purposes only
• Work performed in this cage shall be limited to special tasks of short duration
• Load test certificate, risk control measure documents, WorkSafe registration and comprehensive instructions supplied
• Enamel paint finish


Crane Cage (1 person) WP-C4
Maximum Capacity 1 person
Working Load Limit (WLL) 250kg
Dimensions 750 x 750mm
Unit Weight 120kg
Fork Pocket Size 185 x 85mm
Fork Pocket Centres 530mm

 Warning
It is a mandatory requirement of AS1418.17 that suspension sling sets are supplied as an integral component of a personnel crane cage. If you are using or are offered a cage without dedicated chains or slings, that cage does not comply with Australian Standards and Design Registration requirements and should not be considered for the use of hoisting personnel**

...

WP C4 Dia

 

We are Adelaide based and deliver Australia Wide

australia

Brisbane - Sydney - Canberra - Melbourne - Hobart - Adelaide - Perth - Darwin - Regional Areas

Active Lifting is Quality Assured to ISO 9001 International Standards

Active Lifting Equipment

FOR ALL YOUR CHAIN & LIFTING SOLUTIONS