Crane Cage (4 person) WP-NC

WP NC SThe WP-NC Crane Cage has been designed in strict accordance with Australian Standard AS 1418.17 to elevate up to 4 personnel where it is not practicable to erect scaffolds or use a specially designed device.

Features:

  • Suitable for a maximum of 4 people
  • Fitted with mesh sides to prevent objects falling off the platform
  • Fitted with four (4) safety harness anchor points
  • Supplied with lifting chains
  • Fork pockets provided for transport purposes only
  • Work performed in this cage shall be limited to special tasks of short duration
  • Load test certificate, risk control measure documents, work cover registration and comprehensiveinstructions supplied
  • Zinc finish
Maximum Capacity 4 people
Working Load Limit (WLL) 500kg
Dimensions 1220 x 1100mm
Unit Weight 270kg
Fork Pocket Size 185 x 85mm
Fork Pocket Centres 680mm

 Warning
It is a mandatory requirement of AS1418.17 that suspension sling sets are supplied as an integral component of a personnel crane cage. If you are using or are offered a cage without dedicated chains or slings, that cage does not comply with Australian Standards and Design Registration requirements and should not be considered for the use of hoisting personnel**

WP NC Dia

 

We are Adelaide based and deliver Australia Wide

australia

Brisbane - Sydney - Canberra - Melbourne - Hobart - Adelaide - Perth - Darwin - Regional Areas

Active Lifting is Quality Assured to ISO 9001 International Standards

Active Lifting Equipment

FOR ALL YOUR CHAIN & LIFTING SOLUTIONS