Lock-N-Lift #800 Road Plate Lifter
For Lifting Steel Plates & Road Plates SAFELY
The patented Lock-N-Lift Model 800 tool takes the proven safety and ease-of-use of the Model 750 tool and adds the convenience of allowing for lifting by either a hook or a chain shackle.
Following the success of the Model #750, Model #800 tools have been in use since 1988 throughout North America eliminating the need for pry bars, installation tools or thread cleaning when moving and storing road plates.
The Model #800 tool maximizes worker safety by eliminating the need to ever put a hand, foot or any tooling under a road plate, even during the installation of the weld-in plate.
The Model #800 has an elongated attachment hole, making it possible to lift road plates using either a hook or a chain shackle.
The Model #800 tool is made in the USA from the best available aircraft quality AISI 4340 steel. The tools are heat treated to provide a safe working load of 8,000 pounds with a 5:1 safety factor.
- Model #800 Made in the USA
- Tested by Active Lifting (Proof Test = 7,200 Kg)
- Material: AISI 4340 Chrome Moly Steel
- Original LOCK-N-LIFT – NOT A COPY
The Lock-N-Lift Advantage
Lock-N-Lift LLC is the foremost expert for dovetail style road plate lifting tools in the industry. We sell ONLY dovetail tools because our customers tell us they are the safest, easiest to use and most reliable lifting tools available. We have the original patent since 1981 and continue to improve on our designs – they are our specialty.
Better Balance and Control of heavy plates resulting from Single Point Center Lifting.
Strength is never compromised by worn out threads.
No trip hazards on plates as weld-in receiver is flush mounted.
Maximum trip hazard protection with #PC500 installed.
No need to ever reach under a plate.
Ease of Use
Road plates can be stacked plate-to-plate.
No need for dunnage between plates.
Fast hook-up of Lifting Tools.
No threads to clean.
No cross-threading ever.
Weld-in Plate welds in from one side only – no need to flip plates.
Our Lock-N-Lift tools are rated to lift 3,600 kg 8000 lbs.
They have a 5:1 minimum safety factor.
There are no threads to wear out on lifting tool or receiver.
More than 25,000 tools have been in use since 1981 throughout North America.
|Dimensions||76.2mm 3-1/4″L x 57.15mm 2-1/4″ W x 101.6mm 4-3/4″H|
|Material||AISI 4340 Chrome Moly Steel|
|Safe Working Load||3.600kg 8,000 pounds|
|Weight||2.1kg 4.6 Pounds|
|Heat Treatment||Normalize, Quench & Temper|