pewag PLGW-SN
pewag winner profilift lifting point PLGW-SN Gamma screw nut.
Globally unique.
This screw nut works on the principle of tool-free assembly, which makes it unique worldwide. It takes the successful pewag PLGW supreme eyebolt one step further and is used on loads that come with a threaded bolt instead of a thread. Alternatively, the PLGW-SN supreme lifting point may be attached in a through-hole using a standard screw, which has the additional advantage of being able to use the same lifting point with different material thicknesses. This method requires just crack-tested screws (strength category 10.9) of different lengths.
For additional details and information, please refer to the full operating manual.
Further benefits of the PLGW-SN pewag winner profilift gamma supreme:
- No tools are required for assembly or disassembly
- Saves time, especially if frequent assembly/disassembly takes place
- The lifting point is rotatable (may be set in the load direction) and loadable in all directions
PLGW-SN0,3t PLGW-SN0,5t PLGW-SN0,7t PLGW-SN1,5t PLGW-SN2,3t PLGW-SN3,5t PLGW-SN4,9tPermitted usage
For load capacities in the permitted directions of pull, please refer to the load capacity table. Adjust the lifting point in the permitted load direction before loading.
- Loadable with a 4-fold safety factor under break in all directions.
Non-permitted usage
During assembly, ensure that improper loading cannot arise due to any of the following factors:
- Direction of pull is obstructed.
- Direction of pull is not within the indicated area.
- Loading ring rests against edges or loads.
Each lifting point comes with an individual serial number. Also available with peTAG upon request.
3D views
Videos
Specification table PLGW-SN
| Method of lifting |  |  |  |  |  | |  | |  |  | |
| Number of legs | 1 | 1 | 2 | 2 | 2 | 2 | 3+4 | 3+4 | 2 | 3+4 | |
| Angle of inclination | 0° | 90° | 0° | 90° | 0-45° | 45-60° | 0-45° | 45-60° | asymm° | asymm° | |
| Code / Type | thread [mm] | load capacity [kg] | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| PLGW-SN 0,3 t | M8 | 1,000 | 300 | 2,000 | 600 | 400 | 300 | 600 | 400 | 300 | 300 |
| PLGW-SN 0,5 t | M10 | 1,500 | 500 | 3,000 | 1,000 | 700 | 500 | 1,000 | 700 | 500 | 500 |
| PLGW-SN 0,7 t | M12 | 2,000 | 700 | 4,000 | 1,400 | 1,000 | 700 | 1,400 | 1,000 | 700 | 700 |
| PLGW-SN 1,5 t | M16 | 4,000 | 1,500 | 8,000 | 3,000 | 2,100 | 1,500 | 3,000 | 2,200 | 1,500 | 1,500 |
| PLGW-SN 2,3 t | M20 | 5,000 | 2,300 | 10,000 | 4,600 | 3,200 | 2,300 | 4,800 | 3,400 | 2,300 | 2,300 |
| PLGW-SN 3,5 t | M24 | 6,500 | 3,500 | 13,000 | 7,000 | 4,900 | 3,500 | 7,400 | 5,200 | 3,500 | 3,500 |
| PLGW-SN 4,9 t | M30 | 12,000 | 4,900 | 24,000 | 9,000 | 6,900 | 4,900 | 10,300 | 7,300 | 4,900 | 4,900 |
| Code / Type | thread [mm] | load capacity [kg] | a [mm] | b [mm] | c [mm] | d [mm] | e [mm] | f [mm] |  [mm] | weight [kg/pc.] |
|---|---|---|---|---|---|---|---|---|---|---|
| PLGW-SN 0,3 t | M8 | 300 | 25 | 45 | 10 | 21 | 55 | 35 | 12 | 0.17 |
| PLGW-SN 0,5 t | M10 | 500 | 25 | 45 | 10 | 21 | 55 | 35 | 12 | 0.17 |
| PLGW-SN 0,7 t | M12 | 700 | 30 | 55 | 12 | 25 | 65 | 43 | 14 | 0.28 |
| PLGW-SN 1,5 t | M16 | 1,500 | 35 | 64 | 14 | 29 | 72 | 50 | 19 | 0.42 |
| PLGW-SN 2,3 t | M20 | 2,300 | 40 | 73 | 16 | 34 | 82 | 54 | 22 | 0.50 |
| PLGW-SN 3,5 t | M24 | 3,500 | 50 | 86 | 18 | 40 | 95 | 69 | 27 | 1.00 |
| PLGW-SN 4,9 t | M30 | 4,900 | 60 | 110 | 25 | 47 | 115 | 90 | 36 | 1.90 |
| Load capacity applies to crack-tested screws in strength category 10.9 | ||||||||||
