YOKE Swivel Hoist Ring, with alloy steel washer

Swivel Hoist Ring, with alloy steel washer

Swivel Hoist Ring
Swivel Hoist Ring with alloy steel washer Diagram

  • Designed for lifting heavy loads.
  • Hoist rings are 360º degrees swivel with 180º pivot function.
  • Rated at 100% at 90° angle.
  • 100% magnaflux crack detection.
  • Applications: Lashing or lifting point.

Yoke Logo

WLL
(tonnes)
Torque in Nm E (mm) A (mm) B (mm) D (mm) F (mm) G (mm) Mass (kg) Part No Markings
1.05 38 15.0 65 64 15 158 105 1.7 40994 EK - 0/0
1.90 81 20.0 65 64 15 158 105 1.8 40993 EK - 0/9
2.15 136 25.0 65 64 15 158 105 1.9 40995 EK - 021
4.20 312 26.0 85 79 19 204 134 4.2 40996 EK - 042
4.20 312 56.0 85 79 19 204 134 4.3 40991 EK - 042L
7.00 637 81.0 100 100 25 241 160 6.7 40992 EK - 070
11.00 1005 76.0 120 111 30 286 194 15.5 40997 EK - 110
12.50 1005 95.0 120 111 30 286 220 16.5 40998 EK - 125

 

PWBlogo™Herc-Alloy, Hammerlok, Couplok, Max A Lok, Latchlok & Pinlok are trademarks of PWB Anchor Limited.
YOKE is a registered trademark of YOKE Industrial Corp used by PWB Anchor Limited with the permission of YOKE Industrial.
Dimensions & Masses subject to commercial tolerances & design changes without notice.

We are Adelaide based and deliver Australia Wide

australia

Brisbane - Sydney - Canberra - Melbourne - Hobart - Adelaide - Perth - Darwin - Regional Areas

Active Lifting is Quality Assured to ISO 9001 International Standards

Active Lifting Equipment

FOR ALL YOUR CHAIN & LIFTING SOLUTIONS