YOKE Swivel Hoist Ring with Alloy Steel Washer

YOKE Gr8+10 Swivel Lifting PointGr8+10 Swivel Lifting Point

Load Ring
Gr8+ 10 Swivel Lifting Point Diagram

  • 360° swivel with 180º pivot function.
  • Hoist ring and bail are manufactured from quenched and tempered, forged alloy steel.
  • Test certificates supplied.
  • Rated at 100% at 90º angle.
  • Bolts are metric thread grade 10.9.
  • Standard and long bolt type available.
  • 100% magnaflux crack detection, 20,000 cycle fatigue tested.
  • Applications: Machinery and various lifting and lashing applications.

Yoke Logo

WLL
(tonnes)
Torque in Nm B (mm) EL (mm) L1 (mm) A (mm) G (mm) D (mm) F (mm) H (mm) S (mm) Mass (kg) Part No.
M8 0.3t 30 35 11 45 30 55 10.0 85 35 6 0.2 41001
M10 0.63t 60 35 16 50 30 55 10.0 85 36 8 0.3 41002
M12 1.0t 100 37 18 60 33 57 13.5 98 44 8 0.5 41003
M16 1.5t 150 37 24 60 33 57 13.5 98 46 10 0.5 41004
M20 2.5t 250 54 30 80 50 82 16.5 140 57 12 1.3 41005
M24 4.0t 400 54 36 85 50 82 16.5 140 59 14 1.4 41006
M27 4.0t 400 65 38 110 60 99 22.5 170 79 17 2.8 41009
M30 5.0t 500 65 48 115 60 99 22.5 170 81 17 3.1 41010
M36 7.0t 700 65 54 125 60 99 22.5 178 88 22 3.3 41011
M36 8.0t 800 85 62 140 77 124 26.5 225 101 22 5.8 41012
M42 10.0t 1000 85 72 150 77 124 26.5 225 104 24 6.3 41013
M42 15.0t 1500 104 63 150 95 158 36.0 261 117 24 10.9 41014
M48 20.0t 2000 104 72 160 95 158 36.0 261 121 27 11.6 41015

 

PWBlogo™Herc-Alloy, Hammerlok, Couplok, Max A Lok, Latchlok & Pinlok are trademarks of PWB Anchor Limited.
YOKE is a registered trademark of YOKE Industrial Corp used by PWB Anchor Limited with the permission of YOKE Industrial.
Dimensions & Masses subject to commercial tolerances & design changes without notice.

We are Adelaide based and deliver Australia Wide

australia

Brisbane - Sydney - Canberra - Melbourne - Hobart - Adelaide - Perth - Darwin - Regional Areas

Active Lifting is Quality Assured to ISO 9001 International Standards

Active Lifting Equipment

FOR ALL YOUR CHAIN & LIFTING SOLUTIONS