Gr8 Eye Foundry Hook
Gr8 Eye Foundry Hook
Foundry Hook
- For use where large throat openings are necessary.
- Test certificates supplied.
- Hooks without a latch are generally used for specific applications, therefore where there is a risk of the hooks becoming detached during use, a risk assesment shall be conducted in
- ccordance with Section 11 of AS 3776.
- Applications: Appropriate for foundry applications.
- Australian Standard: AS 3776.
| Chain Size (mm) |
WLL (tonnes) |
K (mm) | P (mm) | A (mm) | D (mm) | T (mm) | H (mm) | Mass (kg) | Part No | Markings |
| 7.1/8.0 | 2.0 | 122 | 61 | 24 | 12 | 20 | 30 | 0.7 | 40351Y | 7+8 - YN |
| 10.0 | 3.2 | 150 | 74 | 31 | 15 | 24 | 34 | 1.2 | 40352Y | 10 - 8 YN 3/8” |
| 13.0 | 5.3 | 180 | 88 | 40 | 20 | 34 | 42 | 2.5 | 40353Y | 13 - 8 YN 1/2” |
| 16.0 | 8.0 | 215 | 98 | 49 | 24 | 43 | 50 | 4.0 | 40354Y | 16 - 8 YN 5/6” |
| 20.0 | 12.5 | 248 | 112 | 60 | 28 | 46 | 57 | 6.6 | 40355Y | 20 - 8 YN 3/4” |
™Herc-Alloy, Hammerlok, Couplok, Max A Lok, Latchlok & Pinlok are trademarks of PWB Anchor Limited.
YOKE is a registered trademark of YOKE Industrial Corp used by PWB Anchor Limited with the permission of YOKE Industrial.
Dimensions & Masses subject to commercial tolerances & design changes without notice.
