Jarrett Backsaver Crane 500kg White Mark II
F19001CW - Backsaver Crane Mark II with Extendable Boom (500kg) - Dacrotised and powder coated white, comes with F18260 (500kg) 10:1 Brake Winch with Cable
Save Your Back …. Save Your Money
The Backsaver Crane provides the perfect lifting solution to tradesmen, farmers, delivery drivers and anyone who has to lift loads of anything from fuel drums, jet skis, small boats, motor bikes, car engines, ride-on-mowers, cement mixers, farm machinery, livestock, fence, brick cutters and even tractor tyres - the possibilities are endless. In fact if you have ever thought, “There’s got to be a better way”, chances are that Jarrett has already found it.
The simple design of the Backsaver Crane means it is easy to assemble and can be fitted almost anywhere – to jetties, utes or tray tops and to a wide variety of fixed platforms. When a Backsaver Crane is vehicle mounted and the time comes to change vehicles, it is simple to remove and leaves only four holes. The Backsaver Crane is then ready to install elsewhere. The Backsaver Crane’s simple operation means that little can go wrong and spare parts are available through Jarrett distributors around Australia.
The Backsaver Crane provides the perfect lifting solution to tradesmen, farmers, delivery drivers and anyone who has to lift loads of anything from fuel drums, jet skis, small boats, motor bikes, car engines, ride-on-mowers, cement mixers, farm machinery, livestock, fence, brick cutters and even tractor tyres – the possibilities are endless.
In fact if you have ever thought, “There’s got to be a better way”, chances are that Jarrett has already found it.
Backsaver Crane:
| Max extended height | 1950 vertical 1450 horizontal at 350kg S.W.L |
| Min extended height | 1530 vertical 1700 horizontal at 280kg S.W.L |
| Max retracted height | 1640 vertical 1060 horizontal at 500kg S.W.L |
| Min retracted height | 1330 vertical 1270 horizontal at 400kg S.W.L |
| Vertical storage height | 2300 |
8000 Series Brake Winch as supplied:
| Model | F18260 |
| Gear Ratio | 10:1 |
| Application | Lifting |
| Rated Capacity | 500kg (4900N) |
| Mass (Winch only) | 6kg |
| Type of Brake | Self Actuating |
| Drum Diameter | 50mm |
| Flange Diameter | 130mm |
| Drum Width | 52mm |
| Fibre Rope size | Ø6mm |
| Maximum Fibre Rope Capacity | 12m x Ø6mm |
| Max. Effort on handle at Rated Load | 18kg |
| Fibre Rope Breaking Strain | 2712kg |
| Fibre Rope as supplied | 7.5m x Ø6mm |
| Fastening Device | Snap Hook |
Webbing cannot be used on these winches
Self actuating brake requires a minimum of 18kg to operate safely.
Jarrett Winches and Cranes are not designed for the movement of people.
