PACIFIC BHW080 WINCH

Extra Information:

The Pacific Brake Winches are compact, lightweight and a cost-effective solution for a variety of applications. They can be used for both pulling and lifting purposes and comply to the Australian Standards AS1418.2 when correctly fitted with the approved wire rope and fittings. They can be supplied with a powder-coated or in stainless steel, depending on your application.

Key Features

Positive Weston-style brake will hold the load in any position.
Compact, lightweight and rugged construction.
Mechanical components enclosed for protection and safety.
Available with a powder-coated.

Ask a question or get a quote for this product

PACIFIC BHW080 Hand Winch

Paciﬁc Brake Winches

The Salt Spray Test is an international standardised test method used to check the corrosion resistance of coated samples. Protective coatings provide corrosion resistance to metallic parts made of steel, zinc and aluminium alloys or brass. Since these coatings can provide a high corrosion resistance through the intended life of the part in use, it is necessary to check this by other means than normal outside exposure. The Salt Spray Test produces an accelerated corrosive attack to the coated samples, in order to predict its suitability in use as a protective ﬁnish. The appearance of corrosion products (i.e. rust) is evaluated after a period of time. Test duration depends on the resistance of the coating; the more resistant the coating is, the longer the period in testing without showing signs of corrosion. After 1,000 hours of the Salt Spray Test, the Paciﬁc Brake Winches did not show any sign of corrosion and the coating was still intact.

Features:

Positive Weston-style brake will hold the load in any position.
Compact, lightweight and rugged construction.
Mechanical components enclosed for protection and safety.
Available with a powder-coated.
Rope to drum ﬁxing clamp provide
BHW125N available as a noiseless model
AS1418.2 Compliance applies when correctly ﬁtted with approved wire rope and ﬁttings.
BHW123 / BHW183 / BHW263 available in stainless steel.
Heat-treated gears.
Strong removable handles.
High precision construction minimises gear noise.

Speciﬁcations

Model	BHW080	BHW120 BHW123* BHW125N**	BHW180 BHW183*	BHW260 BHW263*	SF2200
Pulling Capacity (kg)	370	545	820	1200	1700
Lifting Capacity	180	270	410	600	850
Hand Force Required (kg	16.3	18.4	19.4	19.4	16
Standard Finish	Powder-Coated	Powder-Coated	Powder-Coated	Powder-Coated	Powder-Coated
Gear Ratio	4.2 : 1	4.2 : 1	5.0 : 1	10 : 1	22.2 : 1
Handle Length (mm)	155	208	319	319	300
Hub Diameter (mm)	Ø40	Ø48	Ø60	Ø75	Ø60
Cable Diameter (mm x m)	Ø4.0 x 30	Ø5.0 x 23	Ø6.0 x 24	Ø8.0 x 16	Ø8.0 x 32
Net. Weight (kg)	3.6	3.7	8.1	10.3	13.5
Stainless Steel Available	No	Yes	Yes	Yes	No
Noiseless Available	No	Yes	No	No	No

*Stainless Steel
**Noiseless

Dimensions

The information shown is to be used as a guide only. Speciﬁcations are subject to change without notice. All materials handling or lifting jobs should be assessed individually. Paciﬁc Hoists products are NOT to be used for lifting or lowering persons.

Model	BHW080	BHW120 BHW123* BHW125N**	BHW180 BHW183*	BHW260 BHW263*	SF2200
A	138	138	193	240	100
B	Ø10.5	Ø10.5	Ø10	Ø10	64.3
C	40	40	70	77	238
D	6	6	20	43	214
E	-	-	-	-	108
F	-	-	-	-	300
G	12	12	29	29	156
H	27	27	-	-	Ø16
I	39	39	65	94	Ø155
J	-	-	-	-	Ø60
K	42	42	55	45	118
L	138	138	193	240	224
M	184	184	246	294	342
N	86	86	108	121	238
O	156	156	203	216	198
P	273	273	284	308	130
Q	111	111	111	111	224
R	155	208	319	319	150
S	51	51	60	63	13
T	Ø40	Ø48	Ø60	Ø75	50
U	88	88	107	127	4 – Ø13
W	115	115	135	162	-