KITO EQS Single Phase Electric Chain Hoist – Dual Speed with Inverter
PWB Anchor Entertainment Hoists (415V–50Hz)

KITO ED Series Single Phase (240 Volt)

ED1 Diagram
  • Control: Direct control is standard. Low voltage is available upon request.
  • Power supply cable: 2mm 2 x 3 core 5m with grounding wire.
  • The lifting speed is equal to the average value of the lifting / lowering speed at the rated load capacity. The speed will vary according to the load.
  • Figures in parentheses show the data for 240V(max). • *1:Mass (Net weight) in parentheses are at control voltage 30V.
Power Supply 240V 50Hz/60Hz
Type Single speed type Dual speed type Dual Cylinder type
Model EDL
10S		 EDL
18S		 EDL
16S		 EDL
24S		 EDL
10ST		 EDL
18ST		 EDL
16ST		 EDL
24ST		 EDCL
10SD		 EDCL
16SD		 EDCL
24SD
Rated load (kg) 100 180 160 240 100 180 160 240 100 160 240
Motor output (W) 300 600 300 600 300 600
Time rating (min) 15(20) 10(15) 20 15(20) 10(15) 20 15(20) 20
Inter
mittent
duty		 %ED 30 20 30 30 20 30 30 30
Max.start frequency
(Times per hour)		 180 120 180 180 120 180 180 180
Rated Current (A) 120V 5 6 10 5 6 10 5 10
240V 3 5 3 5 3 5
Lifting Speed (m/min) High 13 8 20 13.5 13 8 20 13.5 13 20 13.5
Low   - - - 3 3 4 3 3 4 3
Standard Lift (m) 3 3 1.8
Push button cord length: L(m) 2.5 2.5 -
Load chain diameter (mm) 4 4 4
Mass (Net weight) (kg) 11.5(12)*1 15.5(16)*1 12(12.5)*1 16(16.5)*1 14.5(15)*1 18.5(19)*1
Min.distance between hooks:C(mm) 315 330 315 330 945 960
Dimension (mm) a 371 (364) 428 371 (364) 428 371 (364) 428
d 187 205 187 205 187 205
e 184 (177) 223 184 (177) 223 184 (177) 223
f 205 219 205 219 205 219
h 125 135 125 135 125 135
i 80 84 80 84 80 84
g 25 25 25
j 25 25 25
k 340 362 340 362 340 362
m 92 92 92
n 73 73 73

Specifications and dimensions are subject to change without notice.

ED III SERIES SINGLE-PHASE 240V

New Capacity 480kg

ED1 Diagram 480kg
ED 480kg
  • *1: Connected with Plain trolley (Geared trolley is also available on request)
  • *2: Mass (Net weight) in parenthesis are at Low voltage control 30V.
  • W.L.L.: Indicates maximum mass (working load limit) which a hoist is designed to support in general service.
  • Control: Direct control is standard. Low Voltage is available upon request.
  • Power supply cable: 2mm 2 x 3 core 5m with grounding wire.
  • The lifting speed is equal to the average value of the lifting/lowering speed at the rated load. The Lifting speed will vary according to the load.
Power Supply Single Phase 240V 50Hz/60Hz
Type Single speed Dual speed
Model ED48S ED48S+PT*1 ED48ST ED48ST+PT*1
W.L.L. (kg) 480
Motor output (W) 600
Time rating (min) 15
Intermittent 
duty		 %ED 30
Max. start frequency
(Times per hour)		 180
Rated 
current (A)		 120V 10
240V 5
Lifting speed
(m/min)		 High 6.7
Low - 2
Standard Lift (m) 3
Push button cord length L (m) 2.5
Load chain diameter (mm) 4
IP (Degree of protection) IP54
Mass (Net weight) *2 (kg) 21(21.5) 25(25.5) 21(21.5) 25(25.5)
Minimum distance C (mm) 520
Flange width adjustability
B (mm)		 - 50 to 102 - 50 to 102
Minimum radius for curve (mm) - 1100 - 1100
Dimension
(mm)		 k 454
g 24
a - 204 - 204
b - 182 - 182
e - 46 - 46
h - 82 - 82
i - 60 - 60
j - 19 - 19
s - 76 - 76
m - 47.5 - 47.5
n - 84 - 84
o - 42 - 42
p - 10 - 10
q - 54 - 54
r - 38 - 38
t - 22 - 22

Specifications and dimensions are subject to change without notice.