Hitachi Electric Chain Hoists
:
Features:
- All Hitachi models are manufactured to comply with AS1418.2.
- Operation: fully contactorised with high rated contactors and pendant controls; both fitted with mechanical interlocks and 24 Volt control.
- Optional IP65 pendant including E-Stop available.
- Safety Limits: full current and shunt limit switches operate in both directions of hook travel.
- Overload Limiter: this electro-mechanical device is exclusive to the Hitachi range and boasts a far more superior overload protection device than the slipping clutch method. Available on all Hitachi models.
- Braking: all models are fitted with an electro-magnetic, self-adjusting disc type brake to the gearbox and the “F” models have an additional auxiliary centrifugal brake fitted to the motor.
- Chain Bucket: noiseless design with flexible mounting.
- High quality Grade 80 zinc or nickel plated load chain supplied as standard.
- IP54 protection rating on all electric hoists and trolleys.
- Motor thermal protection on all Hitachi models.
- Optional radio remote control.
- Ambient temperature requirement of -10 to 40 degrees.
- Class M4 inclusive of 180 starts per hour.
- Completely enclosed design. Entire mechanism including; the motor, dual brake system, gears, rotating parts and electrical system can be operated under severe conditions.
- Reverse phase protection relay on all models excluding; 250kg, 500kg and all single phase models.
- Special low headroom hoist and trolley arrangements available to suit tight headroom applications.
- Electric trolleys are fitted with Guide Rollers as standard to reduce wear and ensure suitability for curved beam applications.
Hitachi Electric Chain Hoists
Hitachi’s reputation for excellence in design, quality, reliability and performance has made this brand a global market leader.
With over three decades of proven reliability throughout Australasia and an extensive operating range, Hitachi Electric Chain Hoists are suited to most applications.
The Hitachi models vary from 250kg to 15 tonne capacity and are available in three or single phase, two speed or single speed while being tested to the Australian standards.
Specifications
Three Phase / Single Speed Hoists - 415Volt, 50Hz
| Model | 1/4 S | 1/2 S | 1 S | 2 S | 1 F | 2 F | 3 F | 5 F |
|---|---|---|---|---|---|---|---|---|
| Stock Code | HEH010 | HEH050 | HEH100 | HEH200 | HEH110 | HEH210 | HEH300 | HEH500 |
| Rated Capacity - kg | 250 | 500 | 1000 | 2000 | 1000 | 2000 | 3000 | 5000 |
| Speed - m/min | 10 | 7.2 | 4.6 | 2.3 | 7.1 | 6.8 | 4.1 | 2.8 |
| Motor - kW | 0.45 | 0.63 | 0.8 | 0.8 | 1.3 | 2.4 | 2.4 | 2.4 |
| Weight - kg | 28 | 31 | 37 | 49 | 42 | 80 | 99 | 121 |
| Headroom - mm | 450 | 450 | 530 | 645 | 535 | 660 | 820 | 1020 |
Three Phase / Two Speed Hoists - 415Volt, 50Hz
| Model | 1/4 SN | 1/2 SN | 1 SN | 2 SN | 2 FN | 3 FN | 5 FN |
|---|---|---|---|---|---|---|---|
| Stock Code | HEH020 | HEH060 | HEH120 | HEH220 | HEH230 | HEH330 | HEH530 |
| Rated Capacity - kg | 250 | 500 | 1000 | 2000 | 2000 | 3000 | 5000 |
| Speed - m/min | 7.2/1.8 | 7.2/1.8 | 4.6/1.2 | 2.3/0.6 | 6.8/1.7 | 4.0/1.0 | 2.8/0.7 |
| Motor - kW | 0.32/0.08 | 0.63/0.16 | 0.8/0.2 | 0.8/0.2 | 2.4/0.6 | 2.4/0.6 | 2.4/0.6 |
| Weight - kg | 33 | 36 | 42 | 54 | 96 | 112 | 146 |
| Headroom - mm | 450 | 450 | 530 | 645 | 660 | 820 | 1020 |
Single Phase / Single Speed Hoists - 240Volt, 50Hz
| Model | 1/4 S1 | 1/2 S1 | 1 S1 | 2 S1 |
|---|---|---|---|---|
| Stock Code | HEH900 | HEH907 | HEH911 | HEH920 |
| Rated Capacity - kg | 250 | 500 | 1000 | 2000 |
| Speed - m/min | 5 | 3.6 | 2.3 | 1.1 |
| Motor - kW | 0.25 | 0.32 | 0.4 | 0.4 |
| Weight - kg | 33 | 34 | 39 | 51 |
| Headroom - mm | 450 | 450 | 530 | 645 |
Three Phase / Electric Trolleys - 415Volt, 50Hz
| Model | 1 ET | 2 ET | 3 ET | 5 ET |
|---|---|---|---|---|
| Stock Code | HET100 | HET200 | HET300 | HET500 |
| Rated Capacity - kg | 1000 | 2000 | 3000 | 5000 |
| ET Speed - m/min | Single Speed | ET 10.5 or 21.0 | ||
| ETN Speed - m/min | Two Speed | ETN 21.0 / 5.3 | ||
| Motor - kW | 0.14 | 0.14 | 0.30 | 0.30 |
| Weight - kg | 33 | 34 | 39 | 51 |
| Min. Radius - m | 1.5 | 1.8 | 2.0 | 3.0 |
| Girder Width - mm | 75-125 | 100-150 | 100-150 | 125-175 |
*Larger girder widths are available upon request
To see the dimensions, open the DIMENSIONS tab above.
Dimensions (in mm)
Hitachi S Series Hoists
| Modal | 1/4S | 1/4SN | 1/2S | 1/2SN | 1 S | 1 SN | 2 S | 2 SN | 1/4 S1 | 1/2 S1 | 1 S1 | 2 S1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Z | 450 | 450 | 450 | 450 | 530 | 530 | 645 | 645 | 450 | 450 | 530 | 645 |
| A | 181 | 183 | 181 | 181 | 216 | 216 | 216 | 216 | 181 | 181 | 246 | 246 |
| B | 184 | 210 | 184 | 184 | 216 | 246 | 216 | 246 | 210 | 210 | 246 | 246 |
| C | 125 | 125 | 125 | 125 | 135 | 135 | 90 | 90 | 125 | 125 | 135 | 90 |
| D | 165 | 185 | 165 | 165 | 170 | 170 | 215 | 215 | 165 | 165 | 170 | 215 |
| E | 620 | 620 | 620 | 620 | 680 | 680 | 705 | 705 | 620 | 620 | 680 | 705 |
| G | 19 | 19 | 19 | 19 | 23 | 23 | 26 | 26 | 19 | 19 | 23 | 26 |
Hitachi F Series Hoists
| Modal | 1F | 2F | 2FN | 3F | 5F | 5FN |
|---|---|---|---|---|---|---|
| Z | 535 | 660 | 660 | 820 | 1020 | 1020 |
| A | 250 | 280 | 280 | 280 | 280 | 280 |
| B | 250 | 280 | 330 | 280 | 280 | 330 |
| C | 135 | 175 | 175 | 120 | 145 | 145 |
| D | 170 | 170 | 170 | 245 | 330 | 330 |
| E | 680 | 845 | 845 | 1090 | 1295 | 1295 |
| G | 23 | 26 | 26 | 42 | 48 | 48 |
Hitachi ET Series Trolleys
| Modal | 1ET | 2ET | 3ET | 5ET |
|---|---|---|---|---|
| B1 | 185 | 210 | 210 | 240 |
| B2 | 190 | 210 | 210 | 240 |
| D | 64 | 75 | 75 | 90 |
| d | 27 | 32 | 37 | 46 |
| F | 303 | 313 | 316 | 323 |
| H | 226 | 245 | 265 | 322 |
| K | 136 | 130 | 140 | 177 |
| T | 65 | 80 | 80 | 90 |
| U | 55 | 40 | 37.5 | 54 |
| V | 159 | 172 | 175 | 181 |
| L | 182 | 200 | 203 | 219 |
| W | 120 | 148 | 148 | 173 |
| E | 133 | 169 | 168 | 202 |
HITACHI ELECTRIC HOIST L-SERIES
HEH010L, HTK1/4L
Hitachi’s reputation for excellence in design, quality, reliability and performance has made this brand a global market leader. With over three decades of proven reliability throughout Australasia and an extensive operating range, Hitachi Electric Chain Hoists are suited to most applications. The Hitachi L-Series model is available in the 250kg capacity three phase, single speed while being tested to the Australian standards AS1418.2.
Hitachi’s reputation for excellence in design, quality, reliability and performance has made this brand a global market leader. With over three decades of proven reliability throughout Australasia and an extensive operating range, Hitachi Electric Chain Hoists are suited to most applications. The Hitachi L-Series model is available in the 250kg capacity three phase, single speed while being tested to the Australian standards AS1418.2.
Key Features
- Significant improvement to the duty cycle which extends operation time.
- Operation: fully contactorised with high rated contactors and pendant controls; both fitted with mechanical interlocks and 24V control. Optional IP65 pendant including E-Stop available.
- Braking: all models are fitted with an electro-magnetic, self-adjusting disc type brake to the gearbox.
- The new chain container next to the main body of the hoist prevents unnecessary movement of the chain container and lower hook doesn’t touch the chain container.
- The new hook allows for easy slinging work with the wide hook dimension.
SPECIFICATIONS
SINGLE SPEED L（H)
| Model | 1/2L(H) | 1/4L(H) | 1/6(H)* | |
|---|---|---|---|---|
| Rated Load (kg) | 500 | 250 | 150 | |
| Rating (％ED) | 40 | |||
| Max.Starting Frequency (Starts/h) | 240 | |||
| Hoisting Speed (m/min) | 50Hz | 7.2 | 10 | 14.4 |
| 60Hz | 8.5 | 12 | 17 | |
| Hook Dimensions (mm) | 27 | |||
*without overload limiter device
SINGLE SPEED S（H)
| Model | 1/2S（H）2 | 1/4S（H）2 | |
|---|---|---|---|
| Rated Load (kg) | 500 | 250 | |
| Rating (％ED) | 25 | ||
| Max.Starting Frequency (Starts/h) | 150 | ||
| Hoisting Speed (m/min) | 50Hz | 7.2 | 10 |
| 60Hz | 8.5 | 12 | |
| Hook Dimensions (mm) | 19 | ||
DUAL SPEED LN（H）
| Model | 1/2LN（H） | 1/4LN（H） | 1/6LN（H）* | |
|---|---|---|---|---|
| Rated Load (kg) | 500 | 250 | 150 | |
| Rating (％ED) | 30 | |||
| Max.Starting Frequency (Starts/h) | 180 | |||
| Hoisting Speed (m/min) | 50Hz | 7.2/1.8 | 10/2.5 | 14.4/3.6 |
| 60Hz | 8.5/2.1 | 12/3.0 | 17/4.3 | |
| Hook Dimensions (mm) | 27 | |||
*without overload limiter device
DUAL SPEED SN（H）
| Model | 1/2SN（H）2 | 1/4SN（H）2 | |
|---|---|---|---|
| Rated Load (kg) | 500 | 250 | |
| Rating (％ED) | 25 | ||
| Max.Starting Frequency (Starts/h) | 150 | ||
| Hoisting Speed (m/min) | 50Hz | 7.2/1.8 | 7.2/1.8 |
| 60Hz | 8.5/2.1 | 8.5/2.1 | |
| Hook Dimensions (mm) | 19 | ||
SINGLE PHASE LS（H）
| Model | 1/2LS（H） | 1/4LS（H） | |
|---|---|---|---|
| Rated Load (kg) | 500 | 250 | |
| Rating (％ED) | 25 | ||
| Max.Starting Frequency (Starts/h) | 150 | ||
| Hoisting Speed (m/min) | 50Hz | 3.6 | 5.0 |
| 60Hz | 4.3 | 6.0 | |
| Hook Dimensions (mm) | 27 | ||
1/2L（H）:1/2L（3m lift） or 1/2LH（6m lift or more）
SINGLE PHASE SS（H）
| Model | 1/2SS（H）2 | 1/4SS（H）2 | |
|---|---|---|---|
| Rated Load (kg) | 500 | 250 | |
| Rating (％ED) | 25 | ||
| Max.Starting Frequency (Starts/h) | 150 | ||
| Hoisting Speed (m/min) | 50Hz | 3.6 | 5.0 |
| 60Hz | 4.3 | 6.0 | |
| Hook Dimensions (mm) | 19 | ||
