Balancer Pneumatic Controls & Control Handles
BCS2090 Straight Hose BCS2323 Coiled Hose
High Relieving Single Balance Control Module to support a constant weight at zero gravity.
Used for near capacity or heavy weight applications greater than 150 lbs [68 kg].
High Relieving Single Balance Control Module to support a constant weight at zero gravity.
Used for near capacity or heavy weight applications greater than 150 lbs [68 kg].
BCS2230 Straight Hose
BCS2326 Coiled Hose
Pendant Control Module for tandemunits. Recommended for heavy fixtures with light parts.
BCS2326 Coiled Hose
Pendant Control Module for tandemunits. Recommended for heavy fixtures with light parts.BCS2017 Straight Hose
BCS2320 Coiled Hose
Up/Down Pendant Control Module for loading and unloading varying weights. The most commonly used control for all balancers.
BCS2320 Coiled Hose
Up/Down Pendant Control Module for loading and unloading varying weights. The most commonly used control for all balancers.
BCS2018
Single Balance Control Module to support a constant weight at zero gravity. Recommended for applications where the part weight is less than 150 lbs [68 kg].
BCS2322 Straight Hose
BCS2215 Coiled Hose
Dual Balance Control Module to support two different weights at zero gravity. For applications where the part weight does not change.
BCS2215 Coiled Hose
Dual Balance Control Module to support two different weights at zero gravity. For applications where the part weight does not change.BCS2214 Vertical Handle
length 18 1/2 in [470 mm]
BCS22213 Horizontal Handle
length 14 in [356 mm]
Feather Touch Balance Control Module. Typically used for light weight applications. This control is activated by an up or down movement of the control handle.
length 18 1/2 in [470 mm]
BCS22213 Horizontal Handle
length 14 in [356 mm]
Feather Touch Balance Control Module. Typically used for light weight applications. This control is activated by an up or down movement of the control handle. BCS2231 Straight Hose
BCS2327 Coiled Hose
High Relieving Pendant Control Module for tandem units. Recommended for light hooks or fixtures with heavy parts.
BCS2327 Coiled Hose
High Relieving Pendant Control Module for tandem units. Recommended for light hooks or fixtures with heavy parts.
Pneumatic Control Handles
BPA9111
Single (1) signal spring return pilot valve
The BPA9111 pilot valve is used to send a signal to a power valve that provides functionality to a tool or fixture.BPA9009
Three (3) port valve with rear exhaust
The BPA9009 block functions like a switch and provides up/down control. For arms and balancers only. Not for use with pilot signals.BPA9001
Two (2) signal spring return pilot valve
The BPA9001 valve is similar in function to the BPA9111 except that it sends two independent pilot signals instead of one.BPA9400
One (1) button control handle assembly. Includes a BPA9111.BPA9100
Two (2) button control handle assembly. Includes a BPA9001.BPA9200
Two (2) button control handle assembly. Includes a BPA9009.BPA9140
Three (3) button control handle assembly. BPA9001 on left and BPA9111 on right.BPA9410
Three (3) button control handle assembly. BPA9111 on left and BPA9001 on right.BPA9240
Three (3) button control handle assembly. BPA9009 on left and BPA9111 on right.Electric Control Handles
Switch Specifications
Switch - UL/CSA Rating
Contact 5 AMPS @ 28 V
Switch - UL/CSA Rating
Contact 5 AMPS @ 28 V
EPA9201
Single (1) buttonelectrical control handle. Includes quick connect micro-switch.
EPA9202
Two (2) button electrical control handle. Includes two (2) quick connect micro-switches.EPA9203
Three (3) button electrical control handle. Three (3) quick connect micro-switches. Two switches on left and one on right.EPA9204
Three (3) button electrical control handle. Quick connect micro-switches one switch on left and two on right.EPA9205
Four (4) button electrical control handle. Quick connect micro-switches.EPA9206
Three (3) button combination pneumatic/ electric control handle. BPA9001 on left and quick connect micro-switch on right.EPA9207
Three (3) button combination pneumatic/electric control handle. BPA9001 on right and quick connect micro-switch on left.EPA9208
Three (3) button combination pneumatic/electrical control handle. BPA9009 on left and quick connect micro-switch on right.EPA9209
Three (3) button combination pneumatic/electrical control handle. BPA9009 on right and quick connect micro-switch on left.
EPA4100
Single (1) button electrical control handle. Two (2) position selector switch ten (10) pin Amphenol connector.EPA4200
Two (2) button electrical control handle.Two (2) position selector switch nineteen (19) pin Amphenol connector.Collar Clamps
Dead Handle Assembly
Dead Handle Assembly Knight standard handle without valve block or switch. Dead handle assembly comes with standard collar clamp sizes of 7/8 in., 1 in., 1 1/4 in. inner diameter.
BPA9000-1 Dead handle assembly with 7/8 in. I.D. collar clamp.
BPA9000-2 Dead handle assembly with 1 in. I.D. collar clamp.
BPA9000-3 Dead handle assembly with 1 1/4 in. I.D. collar clamp.
Knight control handles can be adjusted to ensure an ergonomically correct position. A rotation plate is affixed to the angle plate of the pendant handle. This rotation plate can easily be rotated in increments of 22.5° in either direction by simply removing the fasteners, turning the plate to the desired angle and replacing the fasteners.
Collar Clamps
Right outer - Enter your content here.Collar clamps come in standard sizes of 7/8 in., 1 in., 1 1/4 in. inner diameter. Other sizes are available as special orders.
BPD1119 - Rotating mounting plate with 7/8 in. I.D. collar
BPD1120 - Rotating mounting plate with 1 in. I.D. collar clamp.
BPD1121 - Rotating mounting plate with 1 1/4 in. I.D. collar clamp.
Lever Options
LEVER MARKINGS
UP
DOWN
RETRACT
EXTEND
TILT
LOW
FORWARD
REVERSE
PART
NO PART
TILT UP
TILT DOWN
VAC ON
DOWN
RETRACT
EXTEND
TILT
LOW
FORWARD
REVERSE
PART
NO PART
TILT UP
TILT DOWN
VAC ON
VAC OFF
CLAMP
UNCLAMP
ROTATE
BRAKE
COMMON
PUSH OFF
HIGH
TRACK DOG OFF
TRACK DOG ON
TRACK DOG
START
REVERSE
CLAMP
UNCLAMP
ROTATE
BRAKE
COMMON
PUSH OFF
HIGH
TRACK DOG OFF
TRACK DOG ON
TRACK DOG
START
REVERSE
CUSTOMIZING LEVERSThe levers can be customized for the purpose of identification and ease of use.
PAINT COLORS Up and down levers painted red or green are standard. Custom colors can be applied according to customer specification.
ANGLED LEVERS Control handle levers can be angled to compensate for spaces that may be created by different sized control blocks.
