Endo Air Hoists - Chain Type
Endo Air Hoists - Chain Type
AT / ATC / EHL
Load chain series
Endo chain hoists employ the surface hardened load chain with T, Grade 8.
Specification
| Model | Rated load t | Stroke m |
Air pressure MPa {kgf/cm2} | Lifting speed m/min | Air consumption m3/min (normal) |
Chain sizeXfall | Air inlet | Mass kg |
|---|---|---|---|---|---|---|---|---|
| AT-125K AT-125K-5 |
125kg | 3 | 0.4 {4} | 10.0 | 0.55 | 4.0x1 | Rc.3/8 | 12.5 (13.2) |
| 0.5 {5} | 12.0 | 0.71 | ||||||
| 0.6 {6} | 14.5 | 0.90 | ||||||
| EHL-05TS | 1/2 | 3 | 0.4 {4} | 7.5 | 0.95 | 6.3x1 | Rp.1/2 | 18.7 |
| 0.5 {5} | 9.0 | 1.3 | ||||||
| 0.6 {6} | 10.5 | 1.65 | ||||||
| EHL-1TW | 1 | 3 | 0.4 {4} | 3.7 | 0.95 | 6.3x2 | Rp.1/2 | 24.2 |
| 0.5 {5} | 4.5 | 1.3 | ||||||
| 0.6 {6} | 5.2 | 1.65 | ||||||
| EHL-1TS | 1 | 3 | 0.4 {4} | 4.0 | 1.0 | 7.1x1 | Rp.1/2 | 34.0 |
| 0.5 {5} | 5.2 | 1.4 | ||||||
| 0.6 {6} | 6.0 | 1.8 | ||||||
| EHL-2TW | 2 | 3 | 0.4 {4} | 2.0 | 1.0 | 7.2x2 | Rp.1/2 | 42.0 |
| 0.5 {5} | 2.6 | 1.4 | ||||||
| 0.6 {6} | 3.0 | 1.8 | ||||||
| EHL-3TS | 3 | 3 | 0.4 {4} | 2.0 | 1.75 | 12.5x1 | Rp.3/4 | 75.0 |
| 0.5 {5} | 2.6 | 2.47 | ||||||
| 0.6 {6} | 3.0 | 3.14 | ||||||
| EHL-6TW | 6 | 3 | 0.4 {4} | 1.0 | 1.75 | 12.5x2 | Rp.3/4 | 96.0 |
| 0.5 {5} | 1.3 | 2.47 | ||||||
| 0.6 {6} | 1.5 | 3.14 | ||||||
| Note. ENDO air hoists are available for only indoor, with temperature of -10°C ~ +50°C. The figures ( ) indicate AT-125K |
||||||||
AT.ATC SERIES
AT-125K |
 |
|
 |
Chain type | |
 |
Button Control | |
 |
Chain extension available |
|
 |
Air motor trolley | |
 |
Plain trolley | |
EHL-05TS |
 |
|
|
Chain type | |
 |
Pendent switch available |
|
|
Chain extension available |
|
|
Air motor trolley (MTH-1T-5) |
|
 |
Over load protector (for EHL-05TS) |
|
 |
CE available | |
EHL-1TW |
 |
|
|
Chain type | |
|
Pendent switch available |
|
|
Chain extension available |
|
| |
Air motor trolley (MTH-1T-5) |
|
| |
Over load protector | |
|
CE available | |
| * Spheroidal graphite cast iron body is available for EHL-1TW on request. |
Note 1. Install filter and lubricator to the hoist as close as possible. |
|
EHL-1TS |
 |
|
|
Chain type | |
|
Pendent switch available |
|
|
Chain extension available |
|
|
Air motor trolley (MTH-2T-5) |
|
|
Over load protector | |
|
CE available | |
EHL-2TW |
 |
|
|
Chain type | |
|
Pendent switch available |
|
|
Chain extension |
|
|
Air motor trolley (MTH-2T-5) |
|
|
Over load protector | |
|
CE available | |
EHL-3TS |
 |
|
|
Chain type | |
|
Pendent switch |
|
|
Chain extension available |
|
| |
Air motor trolley (MTH-6.3T) |
|
| |
Over load protector | |
|
CE available | |
EHL-6TW |
 |
|
|
Chain type | |
|
Pendant switch available |
|
|
Chain extension available |
|
|
Air motor trolley (MTH-6.3T) |
|
|
Over load protector | |
|
CE available | |
availability for Small capacity hoists
The under mentioned models have an emergency stop and CE available.
 |
EHW-120R-5 |
 |
|
AT-125K-5 | |
|
ATC-125K-5 | |
 Emergency stop |
||
| EHW-120R-5 / AT-125K-5 ATC-125K-5 | ||
availability for EHL series
| Control Type | ||||||
|---|---|---|---|---|---|---|
| Model name | Pull rope | PC-1 | PC-1B | PCS-2 | PCS-2B | Remark |
| EHL-025TS | O | X | O | |||
| EHL-05TS | O | X | O | |||
| EHL-098TW | O | X | O | |||
| EHL-1TW | O | X | O | Overland protector is required | ||
| EHL-1TS | O | X | O | Overland protector is required | ||
| EHL-2TW | O | X | O | Overland protector is required | ||
| EHL-3TS | O | X | O | Overland protector is required | ||
| EHL-6TW | O | X | O | Overland protector is required | ||
| O mark : CE available X mark : CE not available | ||||||
