B-Safe Harness BH01112

B-Safe Harness BH01112B-Safe Harness BH01112

HARNESS BH01112All B-Safe Harnesses are designed and manufactured to exceed the requirements of AS/NZS 1891.1 2007. Utilising only the finest components we have forged a hard earned reputation for the design, manufacture and supply of superior fall prevention and rescue equipment.

Active Lifting have a broad range of Harnesses designed with the requirements of an end user in mind, allowing for maximum comfort and to ensure an even distribution of fall arrest forces.

Prior to the final inspection each product is individually proof loaded to 7.5KN (750Kg) to verify the integrity of the construction and configuration. All metal hardware used on B-Safe products are batch numbered, tested and fully traceable. It is this attention to detail that allows B-Safe to provide peace of mind to our valued clients. Active Lifting provides a wide range of specialty harnesses for a wide range of applications. For your convenience icons have been derived, to readily identify each harnesses’ attachment points and its applications.

  1. Integrated 2m Webbing energy absorbing lanyard
  2. Computer controlled stitch pattern gives uniformity
  3. Anti roll-out device
  4. Chest strap keeps shoulder straps correctly located
  5. All metal components batch numbered for full traceability
  6. Breathable mesh panel gives the harness form and aids in correct donning
  7. Fall arrest attachment points shown in park position
  8. High tenacity UV stabilised polyester webbing
  9. Adjustable waist belt, fitted with work positioning side Dee rings for working with pole straps
  10. Sub pelvic strap prevents harness ‘peeling’ off the body in the event of a backwards, crouched fall position
  11. All buckles adjust easily
  12. Webbing tidies (Keepers)

Applications and Usage

Fall Arrest – Using the integrated energy absorbing lanyard on the rear Dee, an inertia reel device attached to the Rear Dee or front loops or a separate lanyard attached to the Front Loop.

Restraint Technique – Use in conjunction with an energy absorbing lanyard to rear Dee ring or front loops to limit access to fall situations.

Recovery & Rescue – Using both front loops connected together.

Work Positioning – Using side Dee rings connected with a Pole Strap.


  • Lightweight general purpose harness.
  • Comes complete with 2m wire energy absorbing lanyard permanently attached to the rear ‘Dee’ ring.
  • Fully adjustable leg, shoulder, chest and waist straps.

We are Adelaide based and deliver Australia Wide


Brisbane - Sydney - Canberra - Melbourne - Hobart - Adelaide - Perth - Darwin - Regional Areas

Active Lifting is Quality Assured to ISO 9001 International Standards

Active Lifting is Quality Assured to ISO 9001 International Standards