Weigh Fork Arms
Weigh the goods in situ
The truck mounted weighing system enables goods to be weighed in situ. This not only saves time but also reduces the risk of damage during transport. The system has been specially designed to check the weight of incoming and outgoing goods as well as stock and quality and can also be used to count components and for dosing purposes.
The new weighing forks produced by Meijer Special Equipment can be fitted easily to all brands of forklift trucks. The solid construction and deep-bore technology optimally protect all the electronic parts. A radio transmitter sends the weighing data to the display thereby allowing the driver to read, store and print the information.
Advantages
- No electrical wiring means very low fitting and maintenance costs
- Goods can be weighed at any height
- System fully operational from driver's seat
- Two fully integrated weighing cells in each fork are connected via deep-bore wire channels
- Accuracy of 0.1% compared to the original weighing mass
- Over 20 hour battery capacity
- Spare rechargeable battery included
- Standard Indicator LCD screen can display net weight and add multiple pallet weights. IP-64 compliant
- Works with truck voltages of between 7.2 and 30VDC
- Two batteries and charging system included
Options
- Printer with time and date clock
- IP 65 printer housing
- LED display (colour red)
- Battery for receiver
- Plus indicator with parts counting and printer connection
- Spiral cord instead of wireless communication
 |
Standard indicator with optional LED display |
| Exclusive indicator with standard LCD display and numerical keyboard |
Specifications of weighing forks
| Type |
Capacity kg
at LC 500 mm |
Section (SxD)
mm |
Length (L)
mm |
Lost load thickness (V)
mm |
Mass
kg |
Mounting
ISO/FEM |
WWF25 |
2500 |
145x55 |
1150 |
50 |
130 |
II |
WWF35 |
3500 |
145x62 |
1150 |
50 |
145 |
III |
Specifications of Indicators
Description |
Standard Indicator |
Plus Indicator |
Exclusive Indicator |
| Increments: |
| 1 kg |
Standard |
Standard |
Standard |
| Tare: |
| Through cursor key |
- |
- |
- |
| Through full numerical keyboard |
- |
Standard |
Standard |
| Tare range |
Full scale |
Full scale |
Full scale |
| Tare memory |
- |
- |
50* |
| Parts Counting: |
| Through reference |
- |
Standard |
Standard |
| Through input piece weight |
- |
Standard |
Standard |
| Piece weight memory |
- |
- |
50* |
| Accumulator: |
| Memory with total and number of weighings |
1 |
1 |
50* |
| Environment: |
| -10 C to + 40 C |
Standard |
Standard |
Standard |
| Communication: |
| Id code number |
- |
1 to 65535 |
1 to 65535 |
| Id code number memory |
- |
- |
50* |
| Printer connection |
- |
RC 232 C |
RC 232 C |
| Real time clock |
- |
Optional printer |
Optional printer |
| Other: |
| LCD display |
Standard |
Standard |
Standard |
| LED display |
Optional |
Optional |
Optional |
| Numerical keyboard |
- |
- |
Standard |
| Limited indication |
- |
Standard |
Standard |
| Protection class (IP) |
IP-64 |
IP-64 |
IP-64 |
| European approved version |
Special indicator |
- |
- |
| Explosive proof version (Zone 2) |
Special request |
Special request |
Special request |
*In the 50 memories can be stored separately: one Id number, one tare value, one piece weight value and one accumulator total.
- Capacities shown are nominal. For heavy duty applications please contact us.
- Other capacities and dimensions available on request
- Weighing forks comply with: EN 300-220, EN 45501, 90/384/EU, 89/336/EU/EN55022-B, EN50082-1
- Frequency 433 MHz with a maximum power of 25 mW
<<Materials Handling Index
Enquiry Form
This is a short form you can submit to request information from Active Lifting:
