Ramps
Container Ramps
Type CRS 8 Container Ramp
Fast positioning and removal with the CRS 8 ramp. Fitted with fork pockets either side, along with front flip-ups allows placement in confined areas. Securing safety chains both sides for connection of the ramp to the container. Raised side plates prevent the forklift from driving off the side. Full gusseting under eliminates fatigue of the tread plate decking.
Specifications:
Size 1.8m Long x 2.4m Wide x 160mm High (ground to ramp deck)- Structural Capacity 8000kg SWL
- Unit Weight 460kg
- Enamel Paint Finish
Type: CRN65 Container Ramp
Designed primarily for bridging into a standard container from ground level, this is our most popular ramp. The CRN65 ramp can also be used for vehicle loading from a raised dock. The self-levelling lip allows for full load capacity when on slightly uneven ground.
The standard finish is enamel painted "Safety Yellow".
Specifications:
- Width – 2200mm
- Length – 2000mm
Structural Capacity 6500kg- Unit Weight 275kg
Type CR8 - Container Ramp
Designed primarily for bridging into a standard container from ground level, this is our most popular ramp. The CR8 ramp can also be used for vehicle loading from a raised dock.
The self-levelling lip allows for full load capacity when on slightly uneven ground.
Specifications:
- Width – 2000mm
-
Length – 2000mm
- Capacity 8000kg
- Unit Weight 400kg
Type: CRL8 Container Ramp
With a 3.0 metre overall length (1.5 metres of which is horizontal) this style allows easy placement and removal of the first and second line of pallets in a container. Fork pockets are provided either side of the ramp, along with flip-up front brackets. Securing chains both side prevent unintentional disengagement of the ramp from the container.
- Size 3.0m Long x 2.32m Wide x 160mm High (ground to ramp deck)
- Structural Capacity 8000kg SWL
- Unit Weight 600kg
- Enamel Paint Finish
Truck Ramp
Type ATR1 Truck Ramp
Gripmesh on the ramp area enables good tyre grip. To prevent tyre
wear, chequer plate is used in the manoeuvring areas at the foot of the
ramp and at the horizontal stage. With centre wheels this ramp is
easily moved into position, by the forklift engaging in the unique fork
clamp and steering the ramp (optional).
Height adjustment is via hydraulic hand pump, hand wind gear
drive, air or electric.
Specifications:
- Capacity 6000kg SWL
Unit Weight 3000kg- Overall Width 2180mm
- Drive Width 1830mm
Truck Ramps are built to order to suit customer requirements.
Enquiry Form
This is a short form you can submit to request information from Active Lifting:
