Work Platforms
Type WP
Work platforms are designed to safely carry out tasks of "short duration" and "occasional usage", such as maintenance or stocktake.
Manufactured strictly in accordance with AS 2359.1 the WP platform is suitable for a maximum of two people.
- Paint finish
- SWL - 250kg
- Weight - 115kg
- Type - WP
- Supplied with locking pins
Click to see specifications diagram
*In some states of Australia, the use of Work Platforms must be
approved by the statutory authority. This approval may cover the type
and capacity of the forklift and conditions of operation.
ORDER PICKING CAGES
Type WP-OP
- Handrail Height - 1000mm
- Unit Weight - 150kg
- Pocket Size - 110 x 65mm
- Pocket Centres - 560mm
Suitable only for Stockpicking Forklifts
Due to the varied uses of Order Picking Cages we custom design a wide range of equipment tailor made to your forklift and application.
FORKLIFT GOODS CAGE
Type: WP-GC12 / WP-GC18 / WP-GC24 Goods Cage
WP-GC12
Storage and transport cage suitable for furniture and whitegoods. Ideal for moving goods between mezzanine floors and ground level. Supplied standard with hinged ramp to enable furniture trolleys to be wheeled into the cage.
Specifications
- Load capacity 1000kg
- Pocket size 160 x 65mm
- Pocket centres 650mm
| Type |
Width
mm |
Depth
mm |
Height
mm |
Width
kg |
| WP-GC 12 |
1200 |
1200 |
1000 |
150 |
| WP-GC 18 |
1800 |
1200 |
1000 |
190 |
| WP-GC 24 |
2400 |
1200 |
1000 |
220 |
Type: WP-N Work Platform
The type WP-N Work platform has been designed to safely carry out tasks of "short duration" and "occasional usage", such as maintenance or stocktake.
Manufactured strictly in accordance with AS 2359.1 the type WP-N Work Platform is suitable for a maximum of two people. This unit is supplied standard as a "Flatpack" (1230 x 1150 x 200mm), or may be fully assembled upon request.
Safe Working Load 250kg- Unit Weight 110kg
- Pocket Size 160 x 60mm
- Pocket Centres 640mm
- Painted Finish in "Safety Yellow"
- Supplied with 2 Harness Anchor Rings
- Supplied with Locking Pins
* The use of a Work Platform on a forklift truck should not be considered if the lift capacity of that forklift is less than 1800kg for a Counterbalanced type or 1080kg for a straddle type forklift.
Crane Cages
Type: BSC6 Brick Cage
Designed to convey pallets of bricks, or similar loose products, safely to a work location via overhead crane. Suitable for 1200mm square pallets with an inside clearance of 1540mm.
Specifications:
- 4 Point Lift
- Lift Capacity 2000kg
- Unit Weight 255kg
- Up to 1500mm High Pallets
- Tine Storage when not Hoisting
- Paint Finish 'Safety Yellow'
- Chains not included.
Type: BSN6 Brick Cage
The type BSN6 Brick Cage is designed to convey pallets of Bricks or similar products safely to work locations via overhead Crane. Suitable for 1200mm square pallets (1240mm clear inside), and up to 1500mm overall height.
This unit is supplied standard as a "Flatpack" (1750 x 1370 x 475mm), or may be fully assembled upon request. BSN6-F Flatpack, BSN6-W Welded
Specifications:
4 Point Lift- Lift Capacity 2000kg
- Unit Weight 255kg
- Up to 1500mm High Pallets
- Tine Storage when not Hoisting
- Zinc Plated Finish
- Chains not included.
Type CSP4 Goods Cage
Safely convey loose or palleted goods using either forklift or crane. The full width gate allows 1200mm square pallets to be placed inside the cage if required. 1370mm square x 1200mm high (gate opening 1270mm).
- 4 point lift
- Lift capacity 1000kg
- Unit weight 160kg
- Paint finish safety yellow
- Also available with sheet metal sides instead of mesh infill.
Type WP-C
Designed strictly in accordance with AS1418.17. Supplied with individual load test certificate, comprehensive instructions and Workcover registration. Supplied with lifting chains. Paint finish safety yellow.
- Suitable for 2 people
- SWL 250kg
- Unit weight 160kg
- Size 1200 x 1000 x 2000mm (h)
Type WP-C11
Similar to WPC, but without protective roof.
- Suitable for 2 people
- SWL 250kg
- Unit weight 160kg
- Size 1200 x 1000 x 1100mm (h)
TYPE WP-C2
Can be used for First Aid Rescue.
- Suitable for 4 people
- SWL 500kg
- Unit weight 400kg
- Size 2400 x 1200 x 2200mm (h)
Type: WP-C3 Crane Cage Work Platform
- Suitable for 1 person
- 250kg Safe Working Load
- Unit Weight 160kg
- Size 750mm diameter x 1000mm high
* All Crane Cages are designed strictly in accordance with AS1418.17, and are supplied with load test certificate, instructions for usage and Workcover registration. Supplied with lifting chains. Enamel paint finish safety yellow.
Type: WP-C4 Crane Cage
- Suitable for 1 person
- 250kg Safe Working Load
- Unit Weight 120kg
- Size 750mm x 750mm x 1185mm high
* All Crane Cages are designed strictly in accordance with AS1418.17, and are supplied with load test certificate, instructions for usage and Workcover registration. Supplied with lifting chains. Enamel paint finish safety yellow.
Fork pockets provided strictly for transport purposes only.
Type: WP-C8 Crane Cage
- Suitable for 1 person
- 250kg Safe Working Load
- Unit Weight 135kg
- Size 750mm x 750mm x 2300mm high
* All Crane Cages are designed strictly in accordance with AS1418.17, and are supplied with load test certificate, instructions for usage and Workcover registration. Supplied with lifting chains. Enamel paint finish safety yellow.
Fork pockets provided strictly for transport purposes only.
Gas Cylinder Cages
Type GB-P
Safety cages suitable for gas cylinder storage and transport. The drop ramp allows bottles to be easily rolled into position without lifting. Supplied with load binder and chains to securely fasten cylinders of all sizes and combinations.
- Size - 1200mm x 1200mm x 1000mm high
- Capacity - 1000kg SWL
- Unit weight 120kg
Type GB-C
Safety cages for gas cylinder storage and transport by crane. Supplied with load binder and chains to securely fast gas cylinders.
Type |
GB-CH |
GB-CF |
Length (mm) |
1160 |
1160 |
Width (mm) |
600 |
1200 |
Height (mm) |
1900 |
1900 |
Weight (kg) |
120 |
200 |
Type GC-2
Crane cages suitable for one "G" oxygen and one "G" acetylene gas cylinder. Provision for hoses inside cage. Supplied with loadbinder to securely fasten cylinders. Fitted with 250 dia rubber wheels and able to be lifted by crane.
- Capacity 250kg SWL
- Size 830 x 600 x 1400mm
- Unit weight approx 50kg
Type: GB-CM Gas Cylinder Cage
Secure gas cylinder storage cage, suitable for building sites and mines. Fitted with 4 point crane lift and fork pockets under. The lockable door with mesh roof and sides ensure cylinder and gear security. A load binder prevents cylinder movement during travel.
- 1000kg Safe Working Load
- Size 1060 x 1060 x 1800mm
- Unit Weight approx. 80kg
- Optional Wheels available
Enquiry Form
This is a short form you can submit to request information from Active Lifting:
