Series 2000 Material Lifts

Built for Heavy Materials Like Steel Beams and Continuous Work

This compact lift offers stronger mast design and a superior cabling system. The shorter mast sections allow the 2000 to travel through doorways without tipping and to fit nicely into vehicles with small storage space.

Standard Features

• 10', 15', 20' & 25' heights (3.2m, 4.6m, 6.1m & 7.5m)
• 650 - 1000 lb capacity (300 - 450kg)
• Rolls through standard doorways & tail gates
• Loading Bar - great for overhead cranes
• Reversible forks
• Plunger pins for quick readjustment and compact storage
• No tools needed - no loose parts
• Variety of attachments
• Large 7/32" (5.5mm) load cable
• Lockable, 5" polyurethane casters
• Load cable feeds inside mast (no more exposed cable just inches away from operator's face.)

Standard Features on 2000 & 2100 Lifts

Sumner-built Winch
Highly reliable, single-speed winch uses idler roller to feed four rollers to feed cable evenly on the drum to avoid cable flats

Reversible Forks
By pulling plunger pins, forks can be repositioned for added height or just to get flush with the ceiling.

Lockable 5" Casters
Hard tread urethane wheels with Delrin® bearings.

Fast Action Stabilizer Legs
Mounted on base top, stabilizer legs fold down with ease and lock in place. The 2118 and 2124 models come with stabilizer legs (optional on models 2010, 2015, and 2112).

Roller Wheels
Helps to roll into trucks or vans

Ideal for compact storage
No tools or loose hardware to worry about. Leg lock mechanism releases with the push of a button and locks in the stored position. Leg rollers allow lift to be wheeled around. Forks remove by pulling plunger pins.

10" Rough Terrain Wheels
Makes loading a truck or van hassle free (optional on Series 2000 Lifts).

Product Models & Specs

Series 2000 Material Lifts

Options

	Cable Stay Brake Each mast and carriage can have a factory installed, gravity actuated safety brake which holds loads in place in the event the cable should go slack.
	Pipe Cradle (#783705) Great for duct pipe or other HVAC applications. Slides over standard forks. Packaged in sets of two.
	Boom Carriage (#783642) Ideal for installing pipe or lifting “from the top” applications. Uses four attaching plunger pins and has a 40" (100 cm) reach. Hook has five locations and load capacity decreases the farther out the boom is extended, from 650 lb to 200 lb (300 kg to 90 kg).
	Fork Extensions (#783691) With the push of a button, forks may be extended from 28" to 42" (71–106 cm). With longer forks, the weight capacity decreases to 200 lb (90 kg) and is clearly shown on the forks when extended. A second button returns the extension for convenient storage inside the forks.
	Galvanized Finish (#776270) Now available in optional galvanized finish!