Lift Tables Internal Power UnitsMotor, pump and oil reservoir are completely contained within the lift table.. Product #: Lift Tables

Lift Tables

Lift Tables

Internal Power Units
Motor, pump and oil reservoir are completely contained within the lift table.

Flow Control Valve

Flow Control Valve
Provides incremental control of descent speed. Eliminates the possibility of the platform plummeting in the unlikely event of a hose failure.

Maintenance ChocksMaintenance Chocks

Maintenance Chocks
Lock lift table in fully raised position for safe maintenance access.

Roller Retainers

Roller Retainers
Roller axles are captive within the base frame and platform to eliminate the possibility of upending the platform.

Hold Down Lugs

Limit Switch
Upper travel limit switch stops motor when lift table is fully extended. Can be adjusted to limit travel to any height.

Lift Table Controls

Lift Table Controls
A choice of footswitch, hand held pendant, surface or pedestal mounted pushbutton control.

Hold down Lugs

Hold Down Lugs
Hold down lugs enable lift table to be securely fixed to the floor.

Safety BarSafety Bar

Safety Bar
This highly effective safety device halts the downward motion if an obstruction is met during ascent.

Oversized, Low Pressure Hydraulic Cylinders
Low operating pressure extends the life of the cylinder and other components. The cylinder rods are hard chromed to reduce wear and corrosion.

Hydraulic Cylinder

Vent Line
A clear vent line from the cylinder rod seal to the tank provides a visual indication of any oil bypass within the cylinder and prevents oil spilage

 Lift Table Options
Lift Table

IP56 ELECTRICAL INSTALLATION
Electrics to IP56 degree of protection (to AS1939) for outdoor or washdown applications.

Lift Table

SPECIAL PIANT
Standard enamel finish is red with yellow safety bar. Special colours or paint formulations can be provided.

Lift Table

SKIRT
Concertina skirt made from reinforced vinyl with stiffening rods to prevent ingress into mechanism.

Lift Table

EXTERNAL POWER UNITS
Hydraulic power unit can be external to the lift table, connected via a hydraulic hose.

Lift Table

SINGLE PHASE / THREE PHASE
Lift Table may be supplied in either single or three phase.

lift Table

CHEQUERPLATE PLATFORM
Chequerplate platform for pedestrian non-skid surface.

lto 7

PLATFORM SIZE
Standard platforms available exstock. Non-standard platforms can be built to clients specific dimensions.

Lift Table

HINGED FLAPS
Hinged flaps can be fixed to the platform to span the gap between the platform and the pit edge for flush pit installation.

Lift Table

FORKLIFT SOCKET AT THE SIDES
Forklift sockets can be welded to the sides of the base frame of the lift table for easier relocation (lowered height not increased)

Lift Table

ACCESS HATCH
Access hatch in the platform allows for maintenance access to power unit when the lift table is fully lowered.

Lift Table

GALVANISED PLATFORM
Entire platform can be hot dipped galvanised for enhanced durability and corrosion resistance.

Lift Table

LIFTING LUGS
Screw in lifting lugs for easier installation, especially for installing into a pit. The lifting lugs can be removed after the lift table is installed.

Lift Table

FORKLIFT SOCKETS UNDERNEATH
Forlift sockets can be incorporated into the base frame for easy relocation of the lift table (lowered height increased).

Lift Table

PERSONNEL LIFTING
Includes handrails, gates, safety interlocking and on-board controls.

Lift Table

TANDEM TABLES
Most models available in tandem configuration. Ideal for handling longer loads and higher capacity.

 

Lift Table Diagram

SPECIFICATIONS
MODEL
Cap.
Vertical
Height
Base
Base
PowerUnit
 
Elev.
Weight
Travel
Min
Max
Width
Length
Time
c/w Std.Plt
A
B
C
D
E
 
tonnes
mm
mm
mm
mm
kW
Supply
sec
(kg)
AS025-500
0.25
485
330
815
400
925
#
240/1/50
20
50
AS05-760
0.5
765
150
915
410
610
0.75
240/1/50
10
100
#Actuator Powered Lift Table Based on DC Powered Trolley Range
AS1-900
1
915
175
1090
615
1220
0.75
240/1/50
21
320
AS2-900
2
915
175
1090
615
1220
0.75
240/1/50
42
335
AS3-900
3
915
200
1115
615
1220
2.4
415/3/50
22
390
AS1-900W
1
915
175
1090
1000
1220
0.75
240/1/50
21
340
AS2-900W
2
915
175
1090
1000
1220
0.75
240/1/50
42
355
AS3-900W
3
915
200
1115
1000
1220
2.4
415/3/50
22
410
AS1-1200
1
1220
200
1420
615
1680
0.75
240/1/50
27
500
AS2-1200
2
1220
200
1420
615
1680
2.4
415/3/50
18
530
AS3-1200
3
1220
200
1420
615
1680
2.4
415/3/50
27
545
AS1-1200W
1
1220
200
1420
1000
1680
0.75
240/1/50
27
520
AS2-1200W
2
1220
200
1420
1000
1680
2.4
415/3/50
18
550
AS3-1200W
3
1220
200
1420
1000
1680
2.4
415/3/50
27
565
AS4-1250
4
1250
310
1560
1000
1950
2.4
415/3/50
45
610
AS6-1250
6
1250
320
1570
1000
1950
2.4
415/3/50
45
610
AS4-1250W
4
1250
310
1560
1400
1950
2.4
415/3/50
45
610
AS6-1250W
6
1250
320
1570
1400
1950
2.4
415/3/50
45
610
AS4-1500
4
1500
440
1940
2000
2900
5.5
415/3/50
30
2000
AS6-1500
6
1500
440
1940
2000
2900
5.5
415/3/50
37
2000
 
MINIMUM PLATFORM SIZES
 
Model
Std Platform
Safety bar only
Skirt only
SB & Skirt
No SB or skirt
Max Platform
 
L
W
L
W
L
W
L
W
L
W
L
W
mm
mm
mm
mm
mm
mm
AS025-500
975
480
975
480
1045
550
1125
630
895
400
1200
630
AS05-760
700
500
700
500
800
600
900
700
610
410
900
700
AS1-900
1300
1150
1300
800
1400
800
1500
1000
1220
610
1800
1200
AS2-900
AS3-900
AS1-900W
1300
1200
1300
1200
1400
1200
1500
1400
1220
1000
1800
1600
AS2-900W
AS3-900W
AS1-1200
1800
1150
1800
800
1900
800
2000
1000
1680
610
2400
1200
AS2-1200
AS3-1200
AS1-1200W
1800
1200
1800
1200
1900
1200
2000
1400
1680
1000
2400
1600
AS2-1200W
AS3-1200W
AS4-1250
2050
1300
2050
1300
2180
1410
2280
1500
1970
1300
2900
1800
AS6-1250
AS4-1250W
2050
1700
2050
1700
2180
1810
2280
1900
1970
1700
2900
2200
AS6-1250W
AS4-1500
3000
2400
2980
2400
3150
2480
3090
2510
2910
2350
3600
3000
AS6-1500
SPECIFICATIONS
MODEL
Cap.
Vertical
Height
Base
Base
PowerUnit
 
Elev.
Weight
Travel
Min
Max
Width
Length
Time
c/w Std.Plt
A
B
C
D
E
 
tonnes
mm
mm
mm
mm
kW
Supply
sec
(kg)
AS1-1600
1
1610
250
1860
1000
2185
2.4
415/3/50
24
850
AS2-1600
2
1610
250
1860
1000
2185
2.4
415/3/50
32
860
AS3-1600
3
1610
250
1860
1000
2185
4
415/3/50
32
870
AS1-1600W
1
1610
250
1860
1400
2185
2.4
415/3/50
24
950
AS2-1600W
2
1610
250
1860
1400
2185
2.4
415/3/50
32
960
AS3-1600W
3
1610
250
1860
1400
2185
4
415/3/50
32
970
AS1-1800
1
1815
275
2090
1000
2440
2.4
415/3/50
24
950
AS2-1800
2
1815
275
2090
1000
2440
2.4
415/3/50
32
960
AS3-1800
3
1815
275
2090
1000
2440
4
415/3/50
32
960
AS1-1800W
1
1815
275
2090
1400
2440
2.4
415/3/50
24
1050
AS2-1800W
2
1815
275
2090
1400
2440
2.4
415/3/50
32
1060
AS3-1800W
3
1815
275
2090
1400
2440
4
415/3/50
32
1060
AS1-2000
1
2010
340
2350
1000
2680
2.4
415/3/50
30
950
AS2-2000
2
2010
340
2350
1000
2680
2.4
415/3/50
40
960
AS3-2000
3
2010
340
2350
1000
2680
4
415/3/50
36
960
AS1-2000W
1
2010
340
2350
1400
2680
2.4
415/3/50
30
1050
AS2-2000W
2
2010
340
2350
1400
2680
2.4
415/3/50
40
1060
AS3-2000W
3
2010
340
2350
1400
2680
4
415/3/50
36
1060
 
MINIMUM PLATFORM SIZES
 
Model
Std Platform
Safety bar only
Skirt only
SB & Skirt
No SB or skirt
Max Platform
 
L
W
L
W
L
W
L
W
L
W
L
W
mm
mm
mm
mm
mm
mm
AS1-1600
2300
1150
2260
1150
2440
1260
2550
1370
2190
1000
3000
1800
AS2-1600
AS3-1600
AS1-1600W
2300
1550
2260
1550
2500
1660
2550
1770
2190
1400
3000
2200
AS2-1600W
AS3-1600W
AS1-1800
2550
1200
2530
1180
2740
1300
2830
1390
2460
1025
3300
1800
AS2-1800
AS3-1800
AS1-1800W
2550
1600
2530
1580
2740
1700
2830
1790
2460
1425
3300
2200
AS2-1800W
AS3-1800W
AS1-2000
2800
1200
2800
1180
2900
1300
3020
1400
2680
1045
3600
2000
AS2-2000
AS3-2000
AS1-2000W
2800
1600
2800
1580
2900
1700
3020
1800
2680
1445
3600
2400
AS2-2000W
AS3-2000W

*Any model with a 'W' denotes a wide base Lift Table.
*Due to manufacturing tolerances, actual dimensions may vary.
If these specifications do not meet your requirements, contact Active Lifting for a customised Lift Table.