EASY ARM Intelligent Lifting Arm
The brains of a G-Force in the body of a jib
The G-ForceTM Easy
Arm is the newest addition to our Gorbel family of Material Handling
equipment known as Intelligent Assist Devices (IAD's). We took our patented
G-ForceTM technology
and an industrial processor controlled drive system and integrated them
into an ergonomic articulating jib design.
Available in 70kg capacity with standard spans of 1.8M, 2.4M, and 3M.
The Smarter Way to Lift
G-Force technology gives you the best of both
worlds: the responsiveness and the flexibility of a human operator
plus the power of a machine.
More precise than hoists, more responsive than air balancers, the
G-ForceTM technology
integrated in the Easy ArmTM design
improve safety, productivity and quality.
|
This manufacturer uses the Easy Arm for a wide range of assembly applications.
Easy Arm's optional Float Mode function allows operators to perform precision
tasks with their hands on the load itself for maximum control. |
Applications
This versatile design is ideal for lifting applications that involve:
- Reaching under obstructions / low headroom applications-wire goes
over a pulley on the beam so you don't lose the headroom taken by
the G-Force actuator (flash
video)
- Reach around obstructions (flash
video)
- Reach into work cells/doorways (flash
video)
- Rapid change in direction - you don't have to move the weight
of the actuator (flash
video)
|
Flexible and Convenient
No Foundation Required
Simple 4-bolt hole pattern means you can put it almost anywhere.
Easy Installation
Easy Arm is delivered pre-assembled. To install, bolt the
mast to any reinforced floor. Raise the arm, level and add power. Easy
Arm is now operational.
Easy to Move
Relocation is simple. Unbolt, shift and reinstall.
Click here to see more about Easy Arm >> |
Enquiry Form
This is a short form you can submit to request information from Active Lifting:
