EASYLIFT - Magnetic Lifter for Steel Plates and Bars MODEL DIMENSION (mm) Weight (Kg) Capacity (kg) Width Length/w/switch Height/w/eyebol.. Product #: EASYLIFT - Magnetic Lifter for Steel Plates and Bars

EASYLIFT - Magnetic Lifter for Steel Plates and Bars

MODEL DIMENSION (mm) Weight (Kg) Capacity (kg)
Width Length/w/switch Height/w/eyebolt Flat Round/Dia. (mm)
KRE-15 102 85/102 119/179 7 150  
KRE-30 154 95/128 119/179 14 300  
KRE-50 184 115/148 149/220 21 500  
KRE-80 242 115/158 175/265 35 800  
KRE-100 263 115/158 199/309 44 1,000  
KRE-12/10 102 85/102 119/179 7 120 100/160
KRE-25/20 154 115/148 119/179 15 250 200/200
KRE-45/30 184 135/168 149/220 25 450 300/200
KRE-75/50 242 135/178 175/265 40 750 500/300
KRE-95/70 263 135/178 199/309 50 950 700/300

easyliftKREdia

How to select a right model - weight of work-piece

Appropriate EASYLIFT model is determined by the capacity of model and the weight of work-piece.
The weight of work-piece depends upon it's volume in thousands of shapes. 1 liter of steel (10X10X10 cm) weighs roughly 7.85 kg.

Ex.:   3 cm (thickness) X 100 cm X 150 cm = 45,000 cubic cm = 45 liter7.85 kg (weight per liter) X 45 (liter) = 353.25 kg
For this work-piece, depending upon the character of steel alloy, KRE-50 or KRE-80 can be selected.
Other factors shown on the graphs below should be considered too.

MODEL DIMENSION (mm) Weight (Kg) Capacity (kg)
Width Length/w/switch Height/w/eyebolt
KPL-150 353 234/284 265/375 118 1,500
KPL-200 353 311/388 275/402 166 2,000
KPL-250 353 389/466 270/402 208 2,500
KPL-300 353 466/543 270/402 244 3,000
KPL-350 353 544/621 270/402 280 3,500
KPL-400 353 621/698 273/424 328 4,000
KPL-450 359 699/776 273/443 379 4,500
KPL-500 359 776/853 277/447 424 5,000
KPL-600 722 584/768 275/458 643 6,000
KPL-800 722 739/923 275/479 808 8,000
KPL-1000 722 894/1,078 275/509 968 10,000
* Models over 5 tonnage are constructed in double columns and are equipped with shackle instead of eyebolt.

Conditions and characters of work-piece to be checked

Adhesive Force varying according to Steel Alloy
SUS403 77%

eastliftGraphs

 

SUS430 50%
SC42 95%
SKD11 (H.T.) 40%
SKD11 75%
FCD600 85%
FCD400 85%
FC350 75%
FC250 75%
FC150 75%
SCM440 95%
SCM415 95%
S45C (H.T.) 80%
S45C 95%
S20C 100%
SS400 100%
H.T. stands for heat-treated.

testing


KPL 1000 "EASYLIFT" LIFTING MAGNET

easylift10000Lifting Capacity 10,000 Kg

Handle folds at right angles to the side of magnet and inside "crash bar" (This is to prevent damage to handle)

easylift10000a

Handle extended (as shown in photo) for ease of operation the (Crash Bar) can be used by operator to guide magnet into position.


"EASYLIFT" MAGNETIC MULTI-PURPOSE MACHINE LOADER KRE 75/50 MP

thumb KRE75 50a
Magnet KPL 40 - 400 kg lift (test load 1200 kg) Attachment tested to 800 kg recommended max. Lift to vertical position 150 kg.
Note: Quick operating adjuster to suit various loads (left hand side). Safety stop adjustable to suit load size (right hand side). Steel block shown 171 kg. >> 
Click images to enlarge them.

thumb KRE75 50b


<< Illustrates lifter in operation.
Note: Quick action adjustment pin at rear of adjustment plate (left hand side).
Hole positions in adjustment plate alter centre of gravity of total load.


 
thumb KRE75 50cSteel block shown in vertical position ready to be placed in chuck. >> 
The extended lever is used to guide load into chuck.
Note: See load chart for block size details for 
KRE 75/50MP (Vertical Lift 200 kg max.) 
KPL 40/MP (Vertical Lift 150 kg max.)


"EASYLIFT" MAGNETIC MULTI-PURPOSE MACHINE LOADER KRE 160 MP

thumb KRE160a
Magnet KRE 160 1600 kg lift (test load 5000 kg) Recommended max. lift to vertical 500kg
Adjustable arm (left side of magnet) Hole positions in adjustable arm alter centre of gravity for total load.
(To suit various loads including magnet) >> 
Click images to enlarge them.

thumb KRE160b

<< Adjustable stop (right side of magnet) (to prevent slip of work piece) Magnet is "on" (see handle position)
This is the reverse to standard position for a standard magnet (It is designed to clear floor during lifting)

thumb KRE160cSteel block shown in position ready to be placed in chuck.
The extended handle (See black knob) is used to guide load into chuck. >>