Swivel Hoist Ring, with alloy steel washer Swivel Hoist Ring, with alloy steel washer Swivel Hoist Ring Designed for lifting heavy loads. .. Product #: Swivel Hoist Ring, with alloy steel washer

Swivel Hoist Ring, with alloy steel washer

Swivel Hoist Ring, with alloy steel washer

Swivel Hoist Ring
Swivel Hoist Ring with alloy steel washer Diagram

  • Designed for lifting heavy loads.
  • Hoist rings are 360º degrees swivel with 180º pivot function.
  • Rated at 100% at 90° angle.
  • 100% magnaflux crack detection.
  • Applications: Lashing or lifting point.

Yoke Logo

WLL
(tonnes)
Torque in Nm E (mm) A (mm) B (mm) D (mm) F (mm) G (mm) Mass (kg) Part No Markings
1.05 38 15.0 65 64 15 158 105 1.7 40994 EK - 0/0
1.90 81 20.0 65 64 15 158 105 1.8 40993 EK - 0/9
2.15 136 25.0 65 64 15 158 105 1.9 40995 EK - 021
4.20 312 26.0 85 79 19 204 134 4.2 40996 EK - 042
4.20 312 56.0 85 79 19 204 134 4.3 40991 EK - 042L
7.00 637 81.0 100 100 25 241 160 6.7 40992 EK - 070
11.00 1005 76.0 120 111 30 286 194 15.5 40997 EK - 110
12.50 1005 95.0 120 111 30 286 220 16.5 40998 EK - 125

 

PWBlogo™Herc-Alloy, Hammerlok, Couplok, Max A Lok, Latchlok & Pinlok are trademarks of PWB Anchor Limited.
YOKE is a registered trademark of YOKE Industrial Corp used by PWB Anchor Limited with the permission of YOKE Industrial.
Dimensions & Masses subject to commercial tolerances & design changes without notice.