Single (1) signal spring return pilot valve
The BPA9111 pilot valve is used to send a signal to a power valve that provides functionality to a tool or fixture.
Three (3) port valve with rear exhaust
The BPA9009 block functions like a switch and provides up/down control. For arms and balancers only. Not for use with pilot signals.
Two (2) signal spring return pilot valve
The BPA9001 valve is similar in function to the BPA9111 except that it sends two independent pilot signals instead of one.
Dead Handle Assembly
Dead Handle Assembly Knight standard handle without valve block or switch. Dead handle assembly comes with standard collar clamp sizes of 7/8 in., 1 in., 1 1/4 in. inner diameter.
BPA9000-1 Dead handle assembly with 7/8 in. I.D. collar clamp.
BPA9000-2 Dead handle assembly with 1 in. I.D. collar clamp.
BPA9000-3 Dead handle assembly with 1 1/4 in. I.D. collar clamp.
Knight control handles can be adjusted to ensure an ergonomically correct position. A rotation plate is affixed to the angle plate of the pendant handle. This rotation plate can easily be rotated in increments of 22.5° in either direction by simply removing the fasteners, turning the plate to the desired angle and replacing the fasteners.
Right outer - Enter your content here.Collar clamps come in standard sizes of 7/8 in., 1 in., 1 1/4 in. inner diameter. Other sizes are available as special orders.
BPD1119 - Rotating mounting plate with 7/8 in. I.D. collar
BPD1120 - Rotating mounting plate with 1 in. I.D. collar clamp.
BPD1121 - Rotating mounting plate with 1 1/4 in. I.D. collar clamp.
TRACK DOG OFF
TRACK DOG ON
CUSTOMIZING LEVERSThe levers can be customized for the purpose of identification and ease of use.
PAINT COLORS Up and down levers painted red or green are standard. Custom colors can be applied according to customer specification.
ANGLED LEVERS Control handle levers can be angled to compensate for spaces that may be created by different sized control blocks.